0
There are several openings through the firewall. If you are running wires, fish them through a grommet where something else passes through, making sure that they do not interfere with the gas feed or any pedals.
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you put wires through the firewall of a 1999 Chevy cavalier?
== == Look under your dash by your pedals you will see the main wiring harness coming throught your firewall you can put your wires through there or drill a hole and put them through
Chevy Blazer with a hole in the passenger door What is the best way to repair the hole?
tiger hair and hardner will last for a year or two
Where is the transmission fluid fill hole on a 1991 Chevy blazer 4x4?
The fill hole is the dipstick hole itself. You usually need a long funnel to get fluid into it, and it's slow to fill because of this.
Where is the fuel pump on 94 Chevy blazer 4.3 liter?
Inside the gas tank. You get at it through the top. No, there is no access hole.
How do you put cable from battery through firewall in 1999 mercury sable?
Drill a hole and then insulate the hole with a rubber washer so the cable doesn't chafe on the jagged hole.
How do you replace a rear brake line on 2000 Chevy blazer?
Length of back brake line to replace. hole in it between front and back door
Where is the firewall hole located on a 1999 Honda Prelude?
under the fuse box on the passenger side of the engine compartment, near the windsheild.
Where do you add the transmission fluid on a 1997 Chevy blazer?
dumb question, you put the transmission fluid is the hole the dip stick is in, its like this on all cars that i know of
How do you change the fuel pump on a 88 Chevy s10 blazer fwd?
drain and remove the fuel tank. its grouped with the sending unit under the bung hole.
Where can you get gas lines for a 1988 s 10 Chevy blazer?
at a salvage yard & some auto parts stores ----- if you omly have a hole you can get a splice kit at auto zone
How do I fix or replace the high-low beam switch in a '91 Chevy s10 Blazer?
u have to take the hole thing apart to get to a small screw to take the switch out
Where is the crank position sensor for a 95 blazer?
Where is the crank position sensor hole on a 2003 Blazer
