Want this question answered?
twist the top of the choke, there is no idle screw on the 1999 yz250
By turning the idle adjustment screw located near the choke lever under the carburetor. Counter-clockwise lowers it, clockwise raises it.
It should maybe a minor adjustment needed.
Idle is computer controlled, no adjustment screw.Idle is computer controlled, no adjustment screw.
There is no adjustment screw, idle is automatically controlled by the pcm.
choke idle adjustment on 1988 Buick Riviera
The idle adjustment screw is located on the IACV behind the manifold on a 1998 Honda CR-V. Open the latch on the IACV then take an screwdriver and tighten the adjustment screw.
The IDLE is controlled by the computer. THERE IS NO ADJUSTMENT.
there is no idle adjustment on the neons it controlled by the computer wich opens and closes the idle air control motor located on or near the intake
There is an idle adjustment at the carb. Look where the accelerator pulls the butterfly stop and you will see an adjustment screw.
You can adjust the idle on your Polaris 90 by turning the adjustment screw on the side of the fuel pump. Turn the adjustment screw to the left to increase the idle speed.
There is an idle adjustment and a air to fuel adjustment