Want this question answered?
[object Object]
The idle adjustment screw is located on the IACV behind the manifold on a 1998 Honda CR-V. Open the latch on the IACV then take an screwdriver and tighten the adjustment screw.
bury screw all the way in and turn out 1.5 to 2.5 turns out
"Idle" can mean two things: idle speed, and idle mixture. Both of these are on the carburettor. Idle speed is adjusted via a screw that is on the throttle control cam. Turning this screw will change the RPMs of the machine at idle. The idle mixture changes the amount of gas that flows during idling, and can be changed by a screw inside a round recession on the bottom of the carb.
where can you find the idle of suzuki verona?
It is not adjustable, it's controlled by the engine computor.BEST NOT FULL WITH IT ARE YOU WILL CREATE A MESS TRUST ME.
You may want to check for sticking throttle linkage/cable and also your ignition timing may be advanced
if your sitting on your bike its on the left, its a black plastic screw in a black tube it could also be on the left side of the throttle bodys if they have been changed to a newer year and this will be a gold screw there's two there one handles the rpm for idle the other handles the rpm while on choke or fast idle since it's fuel injected.
If you need to ask this question your better off having a professional work on it for you.
Set idle speed to proper r.p.m, by adjusting the IDLE SPEED SCREW. Turn the IDLE MIXTURE SCREW or the AIR SCREW to for correct procedure, achieve highest speed and best response. The IDLE MIXTURE SCREW (FCR) controls fuel delivery to the idle port and the SCREW is located on the engine side of the carburetor slide. Turning the IDLE MIXTURE SCREW out will make idle and off-idle richer. Turning IDLE MIXTURE SCREW (CR, PWK, PJ, PE) controls the amount of air to the IDLE and SLOW CIRCUIT. This SCREW is located on the air cleaner side of the throttle slide and turning the SCREW out will lean the mixture and turning the SCREW in (clockwise) will richen the mixture.
there should be a little brass nob between the 2nd and 3rd carbies thats it howpe it helps
Idle is computer controlled, no adjustment screw.Idle is computer controlled, no adjustment screw.