It is important to know the location of a car's parts. The Intake Air Temp sensor is located in the housing of the air intake.?æ
The throttle position sensor on a 1995 Ford Bronco is located on the throttle body. It detects how far the accelerator has been pressed.
The temp sensor is located on the intake manifold
All O2 sensors are threaded into the exhaust system at various points.
Yes , there was a 1995 full size Ford Bronco ( the last model year was 1996 )
Throttel sensor is on the intake where the intake hose hooks to the intake, usually on the firewall side.
its going to be in the intake stream. close to the throttle body. it will have a plug with 2 wires. looks like it plugs right into the intake tube. to remove it, unplug it and pull it out. i usually use pliers , its only plastic so dont get crazy with it.
The air temp sensor is in the intake manifold, in the cylinder number 6 intake runner (drivers side, second cylinder from the front) in the lower intake manifold. The plug should have a yellow wire and a black wire.
If you are just wanting to know where it is, it is between the intake manifold and the firewall on the back side.
I have a 1995 bronco and the sensor is located to the right of the distributor. It has only one wire running to it. Mine is a 5.8 as well. I'd imagine the location is the same on the '89 model.
The map sensor on a 1990 Ford 5.8 EFI Bronco is on the passenger side. It is located on the firewall.
There Should be 8. Four under the intake manifold and four along where the temp sensor is.
Speed sensor is on the rear differential.