The temp sensor is located on the intake manifold
It depends on which of them. The one for coolant is located in the water inlet. Ambient temperature sensor is located in the filter box.
It is the sensor located in the water pump. It is a 2 prong plug, screwed straight into the front of the water pump. The other sensor that is located in the cylinder head is for your gauge.
The coolant temperature sensor on a 1998 Honda Accord is located next to the thermostat housing. The sensor has a blue clip located on the right side of the engine compartment.
temp. sensor located on cylinder head below water pump. or follow black metal with hole for hoist straight down.it has electric wires with clip.
The sensor for the temp gauge in the 96 S10 4.3L would be the sensor located between #3 and #5 spark plugs, it has one wire plugged to it. The temp sensor for the ECM is located next to the thermostat housing, it has two wires plugged to it.
There are 3 temp sensors. 1 is under the spark plugs for the head cylinder temp. Another is on the thermostat housing for water temperature. And the 3rd is just beside the water temperature sensor and it's not a sensor it is a temperature switch.
Located under the heater plumbing on the front corner of the cylinder head. 3/4" spanner, careful with that plastic plug OK.
1. Water temperature sensor Intake air temperature sensor cylinder head temperature sensor exhaus temperature sensor and catalytic sensor
the camshsft sensor is located under the water pump.you can`t see it,you have to feel for it
Left rear of cylinder head (single wire sensor)
The water temperature sensor on your 1991 Honda accord, is located on the front of the engine. The sensor is above the water thermostat housing.
The water temperature sensor is located on the front of the engine. You will find the sensor behind the thermostat housing.