a 5.0 is a v8 engine, so there are 8 intake valves.each cylander has 1 intake and one exhaust valve in the head. to install a valve the head must be removed from the engine block
6 thousandths intake and 10 thousandths exhaust
where is the pcv valve on a 1992 f150 with 5.0 liter
The exhaust valve is always smaller.
On the 1992 2.3 it is behind the upper intake manifold, about even with the lower intake manifold (driver's side).This puts it between the manifold and the firewall.
on the intake manifold.
It is on the valve cover, the hose attached to it goes to the intake.
You need the right tools to start with. Look by the manifold intake and remove a piece that looks like a valve next to the manifold intake. then put the new one on and hope it fits nicely. After you install the PCV Valve jump up and down with joy and kick your butt.
No there is not.
.012 on intake .010 on exhaust
It is screwed into the intake manifold between the throttle body and the valve cover
The PCV valve is located in the back of the lower intake manifold. It should have a 3/8" hose going from the PCV valve to a vacuum source on the upper intake manifold.
It is on a bracket mounted on the passager side of the intake manifold right above the valve cover. Its black and has a vaccum line and a electric plug on it. NEUTZ