Most mowers unless electric have a lever that works as a throttle/choke to start your mower. If you just pull back on the lever till the throttle/choke no longer allows gas to the engine this usually shuts it off.
a push mower DOES NOT NEED GAS!! ( a good one though LOL)
If you are talking about the bulb button it is a primer to get gas to the carburetor if the mower has not run for awhile. Usually not needed to restart a warm mower.
form_title= Push Lawn Mower form_header= Keep it simple and mow your lawn with a push mower. What is the square footage of your lawn?*= _ [50] Do you want the mower to be gas or electric?*= () Gas () Electric Have you ever owned a push mower before?*= () Yes () No
form_title=Lawn Mower Parts form_header=Make sure you have the best lawn mower parts with our help! What brand of lawn mower do you have?*= _ [50] Do you own a push or riding lawn mower?*= () Push () Riding Is your lawn mower electric or gas powered?*= () Electric () Gas If you know what part you specifically need, please list it*= _ [50]
a gas mower i take it, you can bend the shaft, shear the keyway, and twist the shaft,
Yes it does have a collision switch,located in the trunk on the drivers side,look for a liitle access area and push the center of the switch down
1 gallon per hour (average)
An electric lawn mower has advantages over gas and push mowers. It does not require gas and are cheaper. However, there is always a risk of running over the electrical cord.
When the gas machine that mows the lawn fails, the person who mows the lawn must push the non-gas mower.
It depends on if you bought a pull start mower or a power mower. The pull start mower will have a handle you have to pull hard to start it. The power mower should have a button that simply turns it on. Make sure there is gas in the pull start mower.
A gas lawn mower is a lawn mower which is powered by gasoline.
Let it run out of gas. or put a kill switch coming from the condenser and ground it to the body of the lawnmower.......the contact with the frame should ground out the motor thus killing the motor