answersLogoWhite

Top Answer
User Avatar
Wiki User
Answered 2006-07-20 23:14:54

Bank one is usually the left side of the motor and sensor 2 would be the one past the converter.

001
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
๐Ÿ˜‚
0

Your Answer

Related Questions


They are screewed into the exhaust pipes--SYSTEM. I belive there is 3 of them in exhaust system. There is none after the muffler.


Screwed into the exhaust system. Follow the exhaust system from the engine rearward and you will find the oxygen sensor or sensors if it if it has more than one.


The location of a o2 sensor on a 1996 Honda Accord is on the exhaust pipe. These parts help regulate the emissions for the vehicle and are placed on the down pipe of the exhaust system.


All O2 sensors are threaded into the exhaust system at various points. Bank 1 Sensor 1 would be the first O2 sensor located in the exhaust system after the bank of cylinders that contain the #1 cylinder.


Thay are screewed into the exhaust system, There will not be any after the muffler.


you do have an ( 02 ) sensor on the exhaust system


All O2 sensors are located somewhere on the exhaust system.


There is more than one O2 sensor and they are all threaded into the exhaust system at various points.


The O2 sensors are on either side of the catalytic convert in the exhaust system.



Bank 1 is the driver's side head, Sensor 1 is the first sensor in the exhaust system as soon as it starts off of the exhaust manifold. Just follow the exhaust pipe on driver's side head to the first o2 sensor.


Measures the amount of oxygen in the exhaust


If yo are wanting to move them to different locations in the exhaust system, I would not recommend it. The computer is programmed for that sensor reading from a certain location. It may not read the same in a different spot in the exhaust system.


It is in the exhaust pipe system. start looking in the exhaust system, starting up by the exhaust manifolds and work your way towards the muffler. There will not be any after the muffler. It is about 3 inches long and screewed into the exhaust pipe with a electric wire on the end of it.


You have several O2 sensors on that vehicle and they are all threaded into the exhaust system at various points.


You have several O2 sensors on that vehicle and they are all threaded into the exhaust system at various points.


That vehicle has several O2 sensors and they are all threaded into the exhaust system at various points.


There are two oxygen sensors one is called the upstream oxygen sensor located in the exhaust manifold and one downstream directly behind the catalytic converter. I think the one you are looking for is mounted in the exhaust manifold sometimes referred to as bank 1 and sensor 1 being the first in the exhaust system. Hope this helps you.


Bank 1 is the bank of cylinders that contain the number 1 cylinder. O2 sensor 1 is the first O2 sensor in the exhaust system between the engine and the catalytic converter.


3.3l & 3.8l engines have two, both in the exhaust system, one before the catalyst, one after. exact location where is the front one located exactly


This sensor varifies flow of the exhaust gases to the intake manifold. If flow is interupted the sensor will inform the onboard computer that the exhaust recirculation system has failed resulting in a check engine light to come on.


There are 4 in the exhaust system.



bank 2 is the drivers side of the engine and sensor 1 is in the exhaust system ( either the exhaust manifold or the EXHAUST PIPE before the exhaust enters the catalytic converter )


A NOX sensor is a nitrogen oxide sensor. It is used in a car's exhaust system to check emissions for nitrogen oxide.



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.