0
Where is the low side port to recharge the AC located on a 1998 Ford Explorer Sport?
Wiki User
∙ 16y ago
On top of the accumulator/drier (It's the cylinder on the passenger side of the engine not too far from your heater fan) It has a plastic cap covering the valve.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
Where is the bank 2 located on a 1998 Ford Explorer sport?
Bank 2 is the drivers side of the engine
Where is the fuel filter located on a 1998 Ford Explorer Sport?
underneath the Explorer , on the drivers side , mounted in the frame rail below the drivers door
In 1998 ford explorer sport where is inertia switch located?
In the right front passenger footwell , by the kick panel
Does a 1998 Ford Explorer Sport have struts or shocks?
The 1998 Ford Explorer Sport ( like the four door version , Ford Explorer ) has shock absorbers front and rear
Where is the factory amp in a Ford Explorer sport?
where is the factory amp in a 1998 2dr ford explorer sport
Which fuse controls flashers on 98 Ford Explorer sport?
I BELIEVE that ( fuse #21 ) is a 15 amp fuse for the hazard flashers on your 1998 Ford Explorer Sport ( at least it is on the 1998 Ford Explorer four door )
Where is the dip stick located on a 1998 ford explorer sport 5 speed Manuel transmission?
There is no dipstick for the manual transmission , the fluid level is checked at the fill plug on the transmission ( underneath the Explorer )
Does a 1998 explorer sport have a voltage regulator?
It's on the back of the alternator
What is the bolt pattern for ford explorer sport 1998?
4/114
Where is the EGR valve located on a 1998 Ford Explorer?
On a 1998 Ford Explorer, the EGR valve is located on the intake manifold. It is behind the throttle body.
Bank 1 Ford Explorer sport 1998?
Bank 1 is the passenger side of the engine in your Ford Explorer
Where is PVC valve in 1998 Ford Explorer Sport?
On the 1998 Ford Explorer Sport with 4.6L V8 the positive crankcase ventilation (PCV) will be located on the driver's side of the vehicle. On top of the front-left engine valve cover will be a grommet and hose assembly. In between the grommet and hose, and attached to the valve cover is the PCV valve.
