You did not specify as to the engine size. Generally they are located in the air tube from the air filter to the throttle plate.
The 1988 Chevrolet Camaro signal flasher unit is located beneath the drivers side dashboard. The signal flasher unit will be to the right of the brake pedal.
The 1988 Chevrolet Camaro RS had a curb weight between 3,086.5 pounds and 3,362.0 pounds. Chevrolet first began producing the Camaro in 1966 for the 1967 model year.
It on the back of the coil packs going into the side of the block.
There is not a separate cooling fan sensor, it controlled by the ECM which get it's reading from the ECT (engine coolant temp sensor)
If your 1988 Chevrolet Celebrity has the V6 engine the oxygen sensor is in the middle of the exhaust manifold nearest the firewall. If you have the 4 cylinder engine the oxygen sensor is located in the exhaust manifold just above the exhaust pipe flange.
on the passenger side exhaust pipe. Just under the passenger door location.
you are flooding the engine
There is no crank sensor on a 1986 camaro z28.. that sensor is in the camaros past 1988 i believe.. but the 1986 carb or fuel injection (tpi) does not have one
The 1988 Chevrolet Camaro 350 fuel filter can be found next to the gas tank. The fuel filter will be on the front of the gas tank.
where is the crankshaft sensor located on a 1988 cutlass supreme
Map sensors were not used on 88 camaros. Only maf sensors
Gm. did not use a crank shaft sensor in 1988, It had a distributor that done everything.