In the steering wheel column. The hazard toggle switch is connected to it.
The turn signal switch is part of the multifunction switch.The turn signal switch is part of the multifunction switch.
The turn signal switch is part of the multifunction switch.The turn signal switch is part of the multifunction switch.
Multifunction switch is bad.
The turn signal/dimmer/wiper switch is the multifunction switch.
The signal light switch is part of the multifunction switch on the steering column.
yes, replace the switch
A multifunction switch has more than one function. It is used for turning on the wiper blades and the lights of an automobile.
The brake lights on a 96 Jimmy are operated by the brake light switch, mounted on the brake pedal assembly. If the switch is bad the lights could stay on or off, or be sporadic.
The multifunction switch attaches to the steering column. It contains the turn signals, wipers, headlights, etc....
Try changing the brake light switch located on the brake pedal shaft under the dash. There's a recall. google "multifunction switch recall jimmy" your dealer should fix it for free.
The brake lights and signal lights are tied together in the signal switch, also known as the "multifunction switch".
You have to test the multifunction switch and make sure the wire harness is good. It most likely the multifunction switch.