TO CHANGE ENGINE OIL
NOTE: Before tipping lawn mower to
drain oil, drain fuel tank by running
engine until fuel tank is empty.
1. Disconnect spark plug wire from spark
plug and place wire where it cannot
come in contact with spark plug.
2. Remove engine oil cap; lay aside on a
clean surface.
3. Tip lawn mower on its side as shown
and drain oil into a suitable container.
Rock lawn mower back and forth to
remove any oil trapped inside of
engine.
4. Wipe oft any spilled oil from lawn
mower or side of engine.
5. Fill engine with oil. (See "ADD OIL" in
the Operation section of this manual).
6. Reconnect spark plug wire to spark
plug. 13
Railroad Model Craftsman was created in 1933.
A manual for the Craftsman lawnmower model 944.607853 can be ordered from the Craftsman company. Another option is to contact the store where the lawnmower was purchased and have them order a manual.
Depending on the model of the Craftsman lawnmower, there is either an oil plug underneath the deck of the mower which needs removed to drain the oil or the lawnmower needs tipped on it's side to allow the oil to drain out through the oil cap area. Once oil has drained you will want to refill the oil until the dipstick registers "full".
Your Craftsman GT3000 was manufactured in 2001.
Craftsman
MTD
MTD
CRAFTSMAN POULAN 1800/2000 CHAINSAWCRAFTSMAN POULAN 1800/2000 CHAINSAWa craftsman poulan 1800/2000 chainsaw
John Deere 38 Snow Thrower snow blower is the model tractor that will fit the craftsman 40 model 842.240510. The model will fit perfectly and will not need any fabrication.
I have the factory Operating Instructions and Parts List for the Craftsman Power Hack Saw Model # 108.1502. What is your question?
Unfortunately the model number you gave it not listed any where. It looks like a serial number. The Craftsman tractor model numbers are like this example :- "CRCRA17542"
Need to know the fuel oil mix for craftsman chainsaw Model #917.353736.