it'a on the right side of the mower (setting on it) just above the front of the deck . there is a valve that you have to turn to drain the oil ,it came with a hose that hooks to the valve as to not make a big mess
Hope this helps
The float valve in the carburetor is not working properly. You will need to remove the carburetor and clean it or replace it.
If there is no drain valve at the radiator you can drain the system at the drain valve on the boiler
There should be a drain valve where you can hook up a hose and then open the valve to drain.
It's a valve that allows you to drain the water from a jet ski. It's used after washing the bilge or to drain the bilge after riding.
bottom of rad you will see a small drain valve
Generally it is 0.004 - 0.006"
A"drain pump" machine uses a drain tube that is higher than the the level of water in the basin and therefore uses a mechanical pump to empty the tank overthat threshold pipe. A "dump valve" drain uses a mechanical valve at the bottom of the basin and simply opens to drain the tank.
MV3 valve is specifically a Bendix product. It's basically the (tractor) brake control valve and trailer supply valve in one housing.
I have a 2001 4.7l. Mine had no drain valve on it. I just took off the lower hose and let it drain that way.
protection valve maintains air in the tractor brake system in the event of the trailer air lines becoming compromised.for example, if a trailer line is leaking, broken or disconnected
The oil drain valve on a 2000 Ford Explorer Sport is located near the rear of the oil pan. The radiator drain petcock is located at the bottom the radiator.
There is a plastic drain valve on one of the bottom corner's of the radiator (facing engine) open valve and properly catch & dispose of coolant that comes out. You may need to use pliers to loosen drain valve. Tighten by hand.