0
It uses a screw on filter so it should be visible screwed into the engine block. Some 1986 Fieros used a filter mounted in the oil pan, so look there in case you have one where the engine has been replaced. If you find it has the screw on filter then use a longer AC/Delco PF51 oil filter to increase oil capacity slightly. Add enough extra oil to compensate for the longer filter.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What is the oil capacity on a 1987 Pontiac fiero?
4 quarts with filter.
How much oil do you need to put in a 1985 Pontiac Fiero GT?
4.5 qts
What vehicle will oil filter QS3980 work in?
1984-1988 pontiac fiero with the 2.5L engine or any pontiac with the 2.5L engine
What is the Recommended oil weight for 1985 v6 fiero?
5w30
How take off filter cap on Pontiac fiero GT 1986?
The oil FILLER cap is turned about a quarter ( 1/4 ) turn to the left and lifted out.The oil filter is removed by using a special tool to unscrew it from the engine block.
Where is the oil filter location on a 2006 Pontiac g6?
where is oil filter for 2006 Pontiac pursuit
Why would your 1985 Pontiac fiero smoke real bad and burn oil?
The basic problem is always the engine has a serious internal problem. The one thing it could be that is not serious is the oil is overfull and diluted with fuel.
What oil is used in a 85 Pontiac fiero gt 2.8?
A good quality 5W30
How much oil do you need to put in a 1986 Pontiac Fiero GT?
4 Quarts
Where is the PCV valve on a 1987 Pontiac Fiero gt?
Right next to the oil cap
What is the oil pump called on the 88 Pontiac fiero 2.5 4-cylinder?
An oil pump Or do you mean the type?
Where is the oil pressure sensor on 1985 Pontiac fiero gt?
This depends on if it has Air Conditioning. AC cars the oil pressure sending unit is on the forward passenger side of the engine over the AC compressor and sort of beside and slightly below the battery. On non AC cars it is near the oil filter accessible from underneath the car on the forward side of the engine.
