Want this question answered?
There is a large bolt on the bottom of the crankcase, underneath the brake.....that is your drain plug.
Not typically as they are a 2 stroke motor
The oil in a polaris trail boss 250 cc can be changed by first opening the hood of the car and figuring out where the oil valve is located. Remove the cover and then use a siphon to remove the bad oil. Then simply funnel in the new oil.
spark plug gap for polaris 425
Its right in front of the starter its a 10mm bolt with a phillips if it has coolant coiming out there replace ur water pump shaft seal. should be 10w30 and fill is in the front hard to get to coming up at an angle half way down the motor fill til it runs out u will need a bendable funnel.
It is 0.028 in.
BKR6E plug with 0.035 gap.
.028
.028
The crankcase drain plug on a 2007 Polaris scrambler 500 is hard to locate. However, it is behind the bolt in the skid plate.
The spark plug gap for a Polaris Indy 500 should be set between .025 and .028 inches. A new spark plug should need no adjustments as they come preset from the factory.
its inside the exhaust