Left rear side of block just below head
The MAP (Manifold Absolute Pressure) Sensor on a 2000 Chevy Suburban is located on the very top of the motor. It is all the way to the back of the motor. There is nothing behind it.
Could be the temp sensor..there could also be an oil pressure sensor at the top, back,or the block.
This is the Manifold Absolute Pressure sensor. It is located on the top of the motor between the fire wall and the intake manifold case.
the map sensor is located on the air intake manifold on the left side under the throttle position sensor on the 2.2 4 cyl. motor.
I am assuming it is the oil pressure gauge, located back side of motor, right below the distributor
egr pressure sensor is located next to the egr cylinoid which is next to the egr pressure valve, they are in back of motor as you pop the hood the egr pressure sensor is locaied on left with one wire haness and 2 vacumm lines connected to it and has 2 small bolts holding it on its an easy change
Somewhere in the side of the motor is a sensor called the oil pressure sensor. Unscrew that sensor and screw in the line for reading the oil pressure. Start the motor up and get your reading. Compare it to specs.
It is located under the motor right next to the oil filter. I just changed mine today.
the sensor is located in side right the motor
motor heat sensor where is it locasted in a 1996 aerostar ford van
most small blick chevys have the oil sensor on the back of the motor behind the intake just right of the distributor
from the top of the motor is probably a faulty or bad valve cover gasket Could be the oil pressure sensor, it is located next to the distributor.