The wheel speed sensor (WSS) is located on top of the rear differential on a 1999 Dodge 2500 4X4. The sensor interacts with a tone ring sandwiched behind the differential ring gear. As the differential ring gear rotates the tone ring sends signals through the wheel speed sensor; the signal is converted to vehicle speed by the Power-train Computer Module and ultimately displayed on the drivers speedometer. The WSS is also used to signal the anti-lock braking system computer under severe braking conditions.
There are two speed sensors on a 1996 Dodge Avenger, an input speed sensor and an output speed sensor. Both are located on the front of the transmission.
Vehicle speed sensor malfunction. Most likely you have a failed output speed sensor on the transmission.Vehicle speed sensor malfunction. Most likely you have a failed output speed sensor on the transmission.
The output speed sensor on the transmission is also the vehicle speed sensor. The output sensor is the two wire sensor on the front of the trans all the way to the driver side.
The output speed sensor is on the rear part of the trans, on the driver side.
The vehicle speed sensor is on the top of the rear axle. The trans output speed sensor is on the driver side tail housing of the trans,
It is the transmission output speed sensor, which is located on the front of the trans far driver side.
it is an electrical malfunction with the output speed sensor on the transmission.
The vehicle speed signal comes from the transmission output speed sensor.
There is no input speed sensor. The output sensor is located on the driver side rear of the auto trans case.
The output speed sensor is located on the back end of the transmission. The vehicle speed signal comes from the abs sensor on the top of the rear axle.
Two wire sensor, front, passenger side of the transmission case.
The output speed sensor is on the drivers side of the transmission and to the rear. The input sensor and output sensor are beside each other but have different connector types. common symptoms of a failed output sensor are: Speedometer stops working or is intermittent, transmission is stuck in second gear ( limp mode ) .