to get the plyers in 24 carrot you will need to find the vent system and go to the go to the place in the bottom left and corner called the procecssing room. and you use the plyers to cut the wires in the freezer room.
remove the small pin with a pair of plyers, maybe 'needlenose' plyers
it is located in the upper left corner on the engine. you will need a pair of plyers to remove the hose clip... it is located in the upper left corner on the engine. you will need a pair of plyers to remove the hose clip...
Plyers is already plural. The singular is plyer.
use a very long flat head screw driver with a hammer and a pair of plyers
=Yes! There is! There is a jet pack and a pair of wings.=
YOU GROW A pair and stop playing poptropica
11.
11.
you take a pair of plyers or a caliper kit from autozone and turn in the calipers. You have to turn them clockwise to make them go back in. do not try and compress them in, you will damage them.
It is located under the dash on the drivers side behind the hood latch. It is WAY under there. Best way to access is get on your knees outside driver side door, and position where you can reach far under dash. Also, be sure to have a fuse picker (small plastic "gripper") or a pair of small plyers or needle nose plyers, etc.
It is located under the dash on the drivers side behind the hood latch. It is WAY under there. Best way to access is get on your knees outside driver side door, and position where you can reach far under dash. Also, be sure to have a fuse picker (small plastic "gripper") or a pair of small plyers or needle nose plyers, etc.
* fires * liars * plyers