Ford Ranger
Ford Ranger XL
Ford Ranger XLT

Where is the pcv valve located on a 1991 Ford Ranger xlt?


Top Answer
User Avatar
Wiki User
2010-06-28 14:41:11
2010-06-28 14:41:11
PCV valve locationI have a 4cyl '91 ranger and believe the valve is mounted on the passenger side of the engine bay, towards the back corner. It should have two hoses connected to it.

I also have a 91 ranger 2.3 and mine was located on the drivers side, just in back

of the throttle body, it has two large hoses connected to it so it makes it hard to



Related Questions

egr valve location on a 1997 ford ranger 23l

where is the PVC valve located on a 1990 ford ranger 2.3 L

The bleeder valve for the brakes on a 1997 Ford Ranger is located in the brake line where it meets the brake disc. The wheel will have to be removed to access the bleeder screw for drum brakes.

The PCV valve, on your Ford Ranger 2.5 liter engine, is located on the outside of the air cleaner housing. The valve is on the back of the housing.

where is the valve located on the 2002 ranger 4.0 liter 6 cyl?

On a 2000 Ford Ranger , 4.0 liter EFI , V6 engine : The PCV valve is on top of the drivers side engine valve cover It is near the rear of the valve cover ( towards the firewall end )

On a 1997 Ford Ranger , 4.0 EFI engine : The PCV valve is on the top of the drivers side engine valve cover , near the rear

On 2002 Ranger 3.0L, the PCV valve is mounted in the valve cover near the brake booster.

The 1995 Ford Ranger 3.0 liter engine PCV valve can be found on the top of the engine. The PCV valve will be on the back side of the air cleaner.

The pcv valve is located on the top of the valve cover. It is a plug in type and just pulls out.

The bleed valve is located on the drivers side of the bell housing.

On newer vehicals the egr valve is located on ignition emissions system and on the older vehicals it is located on the intake manifold..

the dipstick is located between the brake master cylinder and the valve cover.

200 ford ranger tappet valve clearance

There is a heater control valve on the 1999 Ford Ranger. There is no thermal vacuum valve on this year of the vehicle.

Yes , a 1991 Ford Ranger has engines that are fuel injected

I am in the process of replacing my valve for my 2000 Ford Ranger. When I pop the hood it is back and to the right and has a couple of hoses attached to it. If you buy the part it is really easy to identify it with the replacement part.

I have a 5.8L in my 1990 and it is located behind the intake on the passenger side. Right by the valve cover.

I know on my 91 2.3 it is located at the rear of the engine almost underneath the EGR Valve, just feel around and you'll feel the hose, pull the hose apart at the valve.

The PCV valve on the 98 is located in the top of the right (driver's side) valve cover near the back.

egr valve is located to the left side of the plentium if your standing facing the vehicle

located on the top of the transmission directly parralle from the catiletic converter

right rear corner of the intake manifold by the firewall

Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.