0
Where is the plug to get the codes for a check engine light for 2000 acura integra?
Wiki User
∙ 9y ago
The plug is under the dash on the passenger side. It should be a green plug just under the carpet..
Wiki User
∙ 9y ago
Add your answer:
Earn +20 pts
How do you check engine light for a 94 Acura Integra?
To check a engine light you need some kind of scan tool and it will show you what kind of code or codes is set for the engine light to go off.
What are some causes of chugging and hesitating in a 2001 integra GSR?
Chugging and hesitating can be caused by several problems with the Integra. Check for proper fuel pressure, as well as proper engine timing. Check the computer for any engine codes.
Reset the engine check light on Acura MDX?
Have vehicle scanned to determine problem and have codes cleared
How to you set the idle RPM on a 1990 Acura Integra?
The idle on all fuel injected engines is controlled by the engine control module. There are no adjustments to be made. If your idle is high it could be caused by a vacuum leak or a sticking or bad idle air control motor. If you have a check engine light on then you will need to have it scanned for codes.
How do you reset the check engine light on acura 3.2 tl 2005?
Have vehicle scanned to determine the problem and/or have codes cleared
What causes Check engine light 2001 acura?
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
How do you reset check engine light on 2000 Acura RL?
There are pages and pages and items that can cause a check engine light. You need to have it checked for codes with a scan tool. After repair light can be shut off with scan tool.
Where is the plug to check the engine codes on a 1997 Acura CL?
Behind the 'ashtray'? or spare change holder - lower left section at the base of the center console.
What if your 1994 acura just started shaking when stopped or slowing down and your check engine light just came on today what do you do?
First step is to have it checked for trouble codes. If the check engine light is on, the pcm has detected a fault and set a code.
Your engine light came on what do you check?
you check the system for trouble codes.
Can p0700 be fixed?
Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.Yes, P0700 is a code in the engine computer that tells you to check the trans computer for codes. You check those codes and repair them and P0700 will go away.
How does one check engine light codes?
To check engine light codes one would have to bring your vehicle to a mechanic who can use a computer to check the computer chip that regulates this function.
