Look at the belt on the left side of the engine it is on top in the back of the engine it is a black looking box with a circle lid that unscrews and the belt runs on the pulley that it has you take the top lid of and there will be a black dip stick attached to the lid that's it good luck Chris
How can you tell if your power steering pump went out? How can you tell if your power steering pump went out?
Remove the 1998 Oldsmobile power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install the new power steering pump.
At or near the power steering pump.
The power steering lines run between the power steering pump and the rack and pinion.
The camshaft position sensor is right under the power steering pump. Remove the power steering pump to access the sensor.
A power steering pumps as much as the power steering pump can pump.
The power steering pump has probley quit working.
The power steering pump is held on by 2 bolts which are accessed through holes in the pulley. The bolts are on the top and bottom of the power steering pump. You will need to use and socket extension or deep socket. Go to napaonline.com and search for 1998 olds Intrugue then power steering pump to get a view of what it looks like (the picture shows the pump rotated on its side).
Remove the power steering pump hose. Remove the power steering pump belt. Remove the power steering pump retaining bolts. The power steering pump will come off.
it is located behind the power steering pump on the engine block
Secure the power steering pump with the retaining bolts. Attach the power steering hose to the power steering pump. Put the belt on to the power steering pump. Fill the power steering system with fluid.
Remove the belt for am your power steering pump. Remove the power steering pump hose. Remove the power steering pump retaining bolts. Reverse the process to install your new power steering pump.