To obtain a speed pulse you would require a CanBus Unit and connect it to the correct can wires. Usualy the OBD 2 socket. Pins 14(can low) and 6(can high). :)
A speed pulse wire might refer to the speedometer pulse wire that accepts pulse signals in order to display speed. This wire is generally a two wire sender unit that comes pre-calibrated to the vehicle.Ê
where is the speed pulse wire in a Toyota corolla
Pulse was released on 08/11/2006.
Pulse - 2002 2003-08-01 was released on: USA: 1 August 2003
Pulse - Pink Floyd album - was created on -19-10-08.
Injector pulse is controlled by the ECU. Injectors Have a red wire that is hot. Black wire is controled by computer ground...
Midnight Wire was created in 1975-08.
Pulse the door trigger right before unlock, or set up for double pulse unlock, and diode isolate the door unlock wire from the door trigger wire.
The pulses differ because the two pulses are in opposite directions.
The speed pulse wire on a 2009 octavia is pin number 9 on the multi plug connecter on the back of the speedo cluster , remove plug and all the pins are numbered .
It is found at the back of the radio and it is a thin green/white wire. Malby