As you face the front of the car the plug is located on the back of the radiator, toward the bottom, closest to the passenger side. It is large, white and plastic. In order to see it you need to crawl under the car and look at the back of the radiator. The manual tranny version has a flathead nut, the auto has a phillips. The nut is also like a wing nut that you could twist with your fingers if you can fit them in there. Good luck!
bottom of the radiator
Drain the water from your Mazda Protege radiator. Remove the hoses from your radiator. Remove the radiator stabilizing arm. Remove the radiator retaining bolts. Reverse the process to install the new radiator.
there is a tap at the bottom of the radiator
the radiator drain plug is located on the bottom of the radiator,on the radiator
Oil Pan.
straight above your oil drain plug
There is no drain. Loosen the clamp on the lower radiator hose at the drivers side and allow it to drain. The hose can be located from underneath the car once the plastic splash shield is removed.
There is a drain plug on the oil pan that when removed you get oil, and a radiator drain plug that when removed you get antifreeze/water. The radiator drain plug is located at the bottom of the radiator (very front of engine compartment). Typically you can find it by reaching up behind the front bumper and feeling for a large-ish wingnut. They are usually plastic, about the size of a quarter or half-dollar, and can be removed by hand.
Drain plug for the radiator for Mazda Tribute 2001 is located on the right side bottom of the radiator. You'll need to remove the right side mud guard to be able to access it.
On the bottom of your radiator in the middle.
Drain plug is located on the bottom of the radiator Right hand side.
To drain the coolant on a Mazda 626, locate the drain plug on the bottom of the radiator. Remove the plug and drain the coolant into a pan.