Turn the wheels all the way to the right. Look between the back of the driver side wheel and the fender. You will see the reverse light switch just above the transaxle.
To change the reverse lights on a Pontiac Sunfire you need to locate it on the left side of the transaxle. Then, unplug the electric connector and remove the switch along with the socket.
According to my Haynes manual, the reverse light switch is located on the top of the left end (driver's side) of the transaxel.Unplug the electrical connector from the switch and remove the switch with a socket DO NOT use an open end wrench.Installation is the reverse. Tighten the switch to 24 Ft. Lbs.FriPilot
Check the bulbs, check the fuse then check the switch.
Car has manual transmission.
Unscrew that puppy!According to my Haynes manual, the reverse light switch is located on the top of the left end (driver's side) of the transaxel. Unplug the electrical connector from the switch and remove the switch with a socket DO NOT use an open end wrench.Installation is the reverse. Tighten the switch to 24 Ft. Lbs.
GM does not use inertia switches.
GM does not use inertia switches.
How is the ignition key switch replaced on the 2000 Pontiac Sunfire? And after replacing the switch would I have to have it Towed to the Pontiac Dealer in order to have the car key programed to the Computer?
The brake light switch is located on the brake pedal bracket. You'll need to remove the trim panel beneath the steering column to get to the switch and the connector.
The brake light switch is located on the brake pedal bracket. You'll need to remove the trim panel beneath the steering column to get to the switch and the connector. FriPilot
under the dash
The neutral safety switch is found under the clutch pedal on a Pontiac Sunfire. Crawl under the cars steering column to see and reach the unit.