answersLogoWhite

0


Best Answer

start inhibitor relay located next to battery in fuse/relay compartment

User Avatar

Wiki User

โˆ™ 2011-12-08 06:55:20
This answer is:
๐Ÿ™
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar
Study guides
๐Ÿ““
See all Study Guides
โœ๏ธ
Create a Study Guide

Add your answer:

Earn +20 pts
Q: Where is the starter relay located on a 2001 mercury villager sport with a 3.3L automatic?
Write your answer...
Submit
Related questions

Where is the starter solenoid on a 1993 Mercury Villager?

On the starter.


Where is the starter located on a 1995 Mercury Villager minivan?

The starter is located directly underneath the brake fluid reservoir (which is located on the right front corner as you open the hood)...good luck


Where is the starter relay located on a 1998 mercury villager?

All major relays are in the relay box under the hood.


Where is the starter located on 1998 mercury villager?

Top rear of engine directly under the air intake tube/throttle body.


Where is the starter relay located on a 1995 Mercury Villager?

find the battery cable on the starter and follow it up to the relay. It is located in the rectangular relay box in the right side front engine compartment. It is named "Inhibit" .Attached to the starter.


Where is the soleniod switch on 1997 Mercury villager?

If you mean the starter solenoid, it's on the starter.


Price of Mercury Villager 1995 starter?

Probably about $150 and up.


Where would you spray starter fluid on a 1998 mercury villager?

Don't ever !!!!!


Where is the starter located in a Mercury Villager van?

It's located on the driver's side between the engine and the wheel well, kind of beneath the brake fluid reservoir. It runs parallel with the bumper, bolting to the side of the engine.


Where is the connector located for an Actron Code Scanner on a 1995 Mercury Villager?

Unless you have the CP9190 model which includes several different hook-up cables, it can not be done. Pre-1996 vehicles are equipped with the OBD I system. The connector on the 1995 Villager is located on the transaxle near the starter.


Where is the crankshaft sensor located on a 1999 Mercury Villager?

The crankshaft position sensor is at the rear of the engine where it joins with the transmission bellhousing. It is at the left (front) side, not far from the starter.


Where is the crankshaft sensor located on 1999 mercury villager?

The crankshaft position sensor is at the rear of the engine where it joins with the transmission bellhousing. It is at the left (front) side, not far from the starter.


Were is starter on mercury villager at?

The starter is mounted at the top of the transaxle at the back of the engine. You can see it clearly if you remove the air filter box.


Where is the cranck shaft sensor located for a 95 mercury villager?

The crankshaft position sensor is at the rear of the engine where it joins with the transmission bellhousing. It is at the left (front) side, not far from the starter.


Where is the crank shaft sencer located in a 2000 mercury villager?

The crankshaft position sensor is at the rear of the engine where it joins with the transmission bellhousing. It is at the left (front) side, not far from the starter.


Where is the starter located on the 1997 Mercury Sable?

Where is the starter located on a 1997 mercury sable ,and if any display a photo of the part.


What other vehicle starters will fit on a 1994 mercury villager?

The Nissan Quest starter is the same.


Where is speed sensor on a 1998 Mercury Villager?

The speed sensor on my Villager is on top of the transmission near the starter. If you look down at the starter while standing on the driver's side of the engine, the speed sensor should be to your right, down on top of the transmission housing about a foot or two toward the rear of the vehicle from the starter. It will have a wire going from it to the firewall right about where the instrument panel is located. Note: The starter is under the area of the throttle.


How can you relplace the starter on a 1994 Mercury villager?

you can get to the starter from the top side if you pull the air filter housing and hose off first then you can see the starter my 95 as 14mm bolts


Where is code reader on Mercury Villager?

The DLC (data link connector) is located under the dash just below the steering column if you have a 1996 or newer Villager. Pre-1996 vehicles have diagnostic connector mounted on the transaxle beside the starter which must be jumpered to obtain the fault codes.


Where is the starter located on a 1998 Mercury Mountaineer?

The starter on a 1998 Mercury Mountaineer is located on the passenger side of the engine. It is down low, almost underneath the motor.


Where is the diagnostic plug on 1995 Mercury Villager?

The OBD-1 diagnostic connector is located on the back of the block beside the starter. A series of jumper wire locations are used in conjunction with watching the CHECK ENGINE light.


Where is the starter located on a 1990 Mercury Cougar?

The starter is located on the front side of the transmission in this model of the Mercury Cougar. If you need to work on it make sure the transmission is cold so as you do not burn yourself.


Where is the starter located on a 1988 Mercury Topaz?

starter motor is below and to the right of oil filter


Where is the starter located in a 1997 mercury couger?

just follow the positivcable (red) from the bat. to the starter