Follow the upper radiator hose towards the engine block, The part the hose clamps to is the thermostat housing, the thermostat is located under this, generally this requires moving 2 or 3 bolts to acces the thermostat.
THE thermostat IS IN THE HOUSING ON THE ENGINE SIDE OF THE LOWER RAD HOSE.
The thermostat in a 1996 Toyota Corolla DX is located in the top radiator hose. It is in the end that is closest to the engine.
The thermostat is located at the intrace to the engine. There should be ethier 2 or 3 bolts to take out and that's it. Willie and where exactly is the intrace to the engine?
which engine 4cylinder yes 4 cylinder
It is located at the end of the main hose that leads to the engine from the radiator?
Is on the engine block on the upper water hose.
The thermostat is located on the driver side of the engine compartment, between the distributor and transmission area.
On my 92 Toyota Pickup V6 4X4, it is located in a different section than on the 4cyl. If you are looking straight at the engine, look to your right and down into the engine. Look for the LOWER radiator hose and follow it into the engine block. Romove the housing and this is where the thermostat on my truck was located
follow the lower radiator hose to the engine. the hose attaches to the thermostat housing.
The 2006 Toyota coolant temperature sensor is located on the front of the engine. The coolant temperature sensor will be a few inches above the thermostat housing.
thermostat is located on engine block. follow top water hose leading to engine. thermostat is located inside the water intake. remove hose. remove water intake(two bolts)housing. replace thermostat. .
Should be located in the removable housing at the engine end of the upper radiator hose