Front of the engine, driver's side, under the piece the bottom radiator hose connects to. (At least on an '89)
Look in the removable housing at the engine end of the upper radiator hose
89 toyota pickup v6 engine anti knock sensor location
Look at the lower end of engine
The thermostat is located on the driver side of the engine compartment, between the distributor and transmission area.
What Cressida engine will fit to a Toyota pickup model19
On my 92 Toyota Pickup V6 4X4, it is located in a different section than on the 4cyl. If you are looking straight at the engine, look to your right and down into the engine. Look for the LOWER radiator hose and follow it into the engine block. Romove the housing and this is where the thermostat on my truck was located
On a 1993 Toyota Camry Vienta, the thermostat can be easily located by following the lower radiator hose to the point where it attaches to the engine. When replacing the thermostat, always replace gaskets as well.
Follow the upper radiator hose from the radiator towards the engine. The upper radiator hose is connected to the thermostat housing on the engine side.
where the lower radiator hose attaches to the engine block you will find a housing with several bolts to remove them and you will find your thermostat.
Should be in a housing at the engine end of the upper radiator hose
No , the 3.0 liter V6 engine in a 1994 Toyota pickup is NOT an interference engine ( according to the Gates website )
Following the hose that leaves the Radiator , usually on the right ( driver's ) side, you will find it connects to a section at the engine: this connection is where you access the Thermostat.