The timing mark on a Chevy Inline 6 engine is located on the flywheel. It is a steel ball. The timing needs to?æbe located at 4 degrees BTDC.
If you look at the harmonic balance you will see on the front of it a medium size circle. That will be your timing mark.
That requires an OBDII engine scanner to do that.
some one put the wrong balancer on the crank. or put it on inside out...
Finding the inline fuel filter in a 1994 Chevy Mark is easy. The fuel filter should be located near the oil plug under the truck.
there will be a timing mark on the harmonic balancer. and a timing tab on the timing chain cover. point your timing light at the timing tab and you should see the timing mark on balancer. if not timing is way out.markstang.
30 degrees dwell, timing is the second mark above the O mark on the timing tab.
pin the engine on the flywheel. line the timing mark on the cam gear with the timing mark located on the timing cover. the mark on the cover is located at the top and is just a bump formed in the cover.
this site takes to long when we are stressed out i just need timing marks for 5.7l Chevy engine Timing mark is located on the balancer using a timing light aim at the balancer and the straight edge inscribed will show up set at about 6 dgrees before TDC
diagram of timing marks 2c engine toyota
the mark on the camshaft timing gear needs to line up with the mark on the crankshaft timing gear to ensure the camshaft is in proper time with the crankshaft. Keep in mind that the marks will only line-up every other revolution of the engine due to the crankshaft spinning twice as fast as the camshaft.
The fuel pam timing mark Scania 400 is on the engine.
buy a timing light. clip it to the #1 plug wire. loosen the bolt on the distibutor. Unplug the timing advance. start the engine Point it to the harmonic balancer and turn the distributer until the timing mark on the timing cover lines up with the mark on the harmonic balancer. Tighten the distibutor bolt. plug in the timing advance.