If you look at the harmonic balance you will see on the front of it a medium size circle. That will be your timing mark.
Behind the harmonic balancer at the bottom of the engine, behind the timing chain cover.
on the harmonic balancer.
It is located on the harmonic balancer.
Have you tried looking on the engine block and on the harmonic balancer?
It is attached to the timing cover, just behind the harmonic balancer, on the lower part of the engine.
It is bolted into the passenger side of the timing cover on the front of the engine. Look at the front of the engine and it will be behind the bottom pulley/ harmonic balancer.
The crank shaft positioning sensor should be located at the front of the engine just below and to the left of the harmonic balancer. On the timing cover.
Laying under the front of the engine, It will be in the left bottom side of the timing cover behind the harmonic balancer.
harmonic balancer
There should be advance marks on the harmonic balancer, and timing marks on both timing chain gears.
It is mounted on the side of the timing cover on the front of the engine behind the harmonic balancer.
oil leaking from the front of the engine. harmonic balancer doesnt have a seal it does however have a rubber bushing in it this is to take out the virations caused by engine running,hence the name harmonic balancer . you may however have a bad front crankshaft seal that is bad this will leak oil at bottom front of engine so if you are talking bout rubber in harmonic balancer, you will get ruff vibrations from engine when running, also can throw the timing out ANSWER you will have a MAJOR oil leak.....