Transmission Fluid
Ford Ranger
Ford Ranger XLT

Where is the transmission dip stick for a 1994 ford ranger?

131415

Top Answer
User Avatar
Wiki User
Answered
2012-01-26 01:39:10
2012-01-26 01:39:10

The automatic Transmission Fluid dipstick is near the firewall , towards the

passenger side of the engine in the engine compartment . The manual

transmission fluid level is checked underneath the vehicle at the transmission

fill plug

001
๐Ÿ˜‚
0
๐ŸŽƒ
0
๐Ÿคจ
0
๐Ÿ˜ฎ
0
User Avatar

Related Questions


manual or automatic transmission


For a 1994 Ford Ranger, the manufacturer's recommendation is DEXRON-MERCON automatic transmission fluid.


can you use a transmission from a 1993 ford ranger in a 2000 ford ranger?


I'm not a mechanic / technician but the transmission for a 4x4 has a different tailpiece on it so the transfer case can be bolted to it


For a 1994 Ford Ranger ( for North America ) The 5 speed manual transmission takes : ( 2.8 U.S. quarts of MERCON automatic transmission fluid )


For your manual transmission , I believe it is on the drivers side



On a 1994 Ford Ranger : The 5 speed manual transmission takes ( 2.8 U.S. quarts of MERCON automatic transmission fluid ) ( transmission code " M " / Mazda )


A 5.0 liter engine will fit in a 1994 Ford Ranger with some modifications. The position of the transmission, motor mounts, and wiring will all need to be changed.


On a 1994 Ford Ranger : For transmission code " M " ( 5.6 U.S. pints of MERCON automatic transmission fluid is used in the 5 speed manual transmission , made by Mazda ) according to www . the ranger station . com ( no spaces )


There is none! http://www.ranger-forums.com/showthread.php?t=106474


right behind the motor an in front of the transmission its where they meet


As far as I can tell , the A4LD automatic transmission was used in the Ford Ranger from ( 1985 to 1994 model years ) *** transmission code " T " ***


Ford manual transmissions do not have dipsticks like most Ford automatics do The manual transmission fluid level is checked at the fill plug on the transmission


The manual transmission does not have a dipstick , the fluid level is checked at the fill plug on the transmission


The manual transmission usually has a plug in the side of the transmission that can be used to check the transmission and also used as a filler hole.


A transmission in a 1994 Ford Ranger 2. 3 L 5 can make popping noises due to the transmission being badly mounted. The transmission can also make popping noises if the differential went bad.


1994 ford ranger starts once in awhile


are there struts or shocks on the front of a 1994 ford ranger 2wd


On a 1994 Ford Ranger : Check in the front passenger footwell , under the front edge of the carpet , mounted on the toe board just to the right of the transmission hump I believe that is where the fuel pump inertia switch is on a 1994 Ford Explorer


No. From 1983-84 Ford used the C3 transmission. A 1990 will not fit.


If the trans is in a ford ranger it is more than likely a ranger trans


Will a 1997 Aerostar transmission fit in a 2000 ford ranger?


The 1972 Ford Ranger pickup truck transmission holds 12 quarts of transmission fluid. The 1972 Ford transmission can only use a transmission fluid made for Ford transmissions.


The gear box ( manual transmission ) is bolted to the rear of the engine



Copyright ยฉ 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.