Want this question answered?
The canister vent valve is located near the fuel tank. The canister purge valve is located on the engine.
The ORVR valve in a Toyota Camry is an on-board refueling vapor recovery valve. This valve is located in the upper portion of the fuel tank.
The expansion valve on a 1997 Honda Accord AC is located in line with the tube that supplies liquid coolant to the air conditioner vapor. It is mounted right beside the tube.
behind the rear tire on the drivers side under the mud flap
Try replacing the PCV valve ( $ 3.00). It is located in valve cover. If they stick open it allows oil vapor to burn.
P0442 - EVAP CONTROL SYSTEM LEAK DETECTED ( SMALL LEAK ) possible causes : - damaged , cross threaded or loosely installed fuel filler cap - aftermarket EVAP hardware such as a fuel cap not conforming to Ford specifications - small hole or cut in fuel vapor hoses / tubes - canister vent solenoid stays partially open on closed command - loose fuel vapor hose / tube connections to EVAP system components - EVAP system component seals leaking ( EVAP canister purge valve , fuel tank pressure sensor , canister vent solenoid , fuel vapor control valve tube assembly or fuel vapor vent valve assembly )
It is located directly in front of the fuel tank, on the frame above the purge vapor canister.
in the fuel line up close to or on injector rail there should be what looks like a air valve, push it in until pressure is constant this will fix the vapor lock,but then replace gas cap
The Vapor Canister is located under the battery box.
good luck left rear bumper no room for both hand took me 4 hours
It is a normally open valve. The ECM closes it by applying 12VDC.
Changes the refrigerant from liquid to vapor.