Mine just failed on my car...about to dig into the repair. Will let you know how the job turns out and where located.
The vent valve is mounted on a bracket near the fuel tank. Disconnect the electrical connector. Remove the hose from the vent valve then release the retainers and remove the vent valve from the bracket. Installation is the reverse of removal.
where is the evaporative emission system vent valve control on a 2000 galant 4 cly engine
install updated vent control solenoid valve and jumper harness.
Evaporative Emission Control System Vent Control Circuit Malfunction, look for faulty vent valve or a short on the vent control circuit.
The EVAP vent valve/control solenoid is mounted on a bracket by the fuel tank. The EAVP purge valve/control solenoid is mounted on the front top of the intake manifold. Just behind the area where the throttle housing bolts to the front of the intake. It has an electric wires connected to it.
drop the spare tire,under neath the spare tire the canister is right there,undo 3 12mm bolts and the canister will come down,then theres 2 10mm that hold the vent control valve in there undo the vapor lines and the vent valve connector and reinstall new one
You may be talking about the fuel vent. The evaporation emission control valve. If so, it is on the line running out of the fuel tank.
Where is the evap purge control valve located on a 96 camaro
The vent valve is mounted on a bracket near the fuel tank. Disconnect the electrical connector. Remove the hose from the vent valve. release the retainers and remove the vent valve from the bracket. It is under the truck.
fuel vent valve is on the top of the gas tank
P0449 Evaporative Emission Control System Vent Valve/Solenoid Circuit Malfunction
Code PO499 = Evaporative Emission System vent control circuit high. Problem can be a loose or defective gas cap, blocked gas vent, EVAP/Carbon canister purge valve fault, or loose, cracked, or broken vacuum hose.