A typical car battery charger will plug into a wall outlet. The end that connects to the battery itself generally has aligator clips on two different leads. The black one is your ground or negative, the red is your positive. Attach each clip to its corrisponfing battery post. Follow the directions for your specific charger to ensure your charge the battery properly.
plug it in a charger
take the battery out and put the battery into the battery charger that came with it and then plug into wall...
It depends on the charger. The one I have, all you do is hook up the red clamp to the red pole on the battery, the black clamp to the black pole, then plug the charger in to an outlet. The charger has a gauge on it that tell you when the battery is fully charged. I don't know where to hook the charger
You connect the cables BEFORE you plug in or turn on the charger. Positive (red) to battery positive first, then negative (black) to battery ground. Then you turn on your charger and set the timer.
You either plug it in to the charger, or replace the battery.
underneath, near the front
You either plug it into your computer OR buy a charger that you plug into an outlet
plug in your charger into your ipod or iphone and then plug in the other end to your computer
Yes, just find connect the charger positive cable to the positive + side post terminal on the battery. Then connect the negative charger cable to any metal place on the engine. Plug the charger in and it will recharge the battery.
Connect the positive (+) Red cable from the charger to the positive (+) post of the battery. Now connect the negative (-) Black cable to a metal part of the engine. Do not connect to negative battery post. Plug the charger in. Unplug the charger before removing the cables. Disconnect the negative cable first.
I would not I would buy a 12 volt charger and plug it in for a day
Your charger may be shot. Remove the battery and plug in the charger. If your computer does not power up, it's the charger.