I do not know so I am going to say nowhere
You will need the Ford Hydraulic Clutch Quick Disconnect Tool.
Easy use a quick disconnect tool or a small screwdriver
You need to replace the quick disconnect. Special tools are required to separate the joint without doing damage. Those lines are transmission cooling lines that bring the ATF to and from the cooler.
Carefully
You need to get a quick disconnect tool from any parts house to remove the fuel lines.
You have to use a 3/8" or 10mm quick disconnect tool. It slides in and expands a spring clip in inside so you can pull it apart.
there's a quick disconnect on the transmission it might be bad or you might be running out of clutch.
insert a quick disconnect tool into the coupler , the same tool you would use to disconnect fuel lines.
U have to use a special "Quick Disconnect" tool. Usually about 5 bucks...
Those transmissions have whats called a "Quick Connect" fitting. There are little plastic tabs on the fittings that must be pushed in so that the line can be pulled out.
buy a fuel Quick disconnect tool. They make cheap plastic ones, and slightly more expensive metal ones
With a quick disconnect tool. Your local auto parts store has them and they are not expensive.