0
What else can I help you with?
How do you reduce the rpm of a hydraulic motor?
Reduce the output flow of the pump supplying fluid to the motor
What is the output in RPM of a 7.5Kw motor?
You cannot tell from the power rating alone. It could be 1725, 3250, or any other RPM.
Is the torque output of a DC motor directly proportional to armature current?
In dc shunt motor,base speed is 500 rpm and its field current is 17A, top speed is 1200 rpm and field current is 5.6 A.But 600 rpm it has reduced by 10A It is normal? How
Why 2900 rpm motor is less price than 1450 rpm motor?
Materials for producing 2900 rpm motor is less than 1450 rpm one
Why are your RPMs high at high speeds?
Because your motor is spinning faster at higher speeds causing higher rpm's
Can a 2800 rpm motor replace a 1400 rpm motor for air compressor?
No
Why does 95 probe overheat when engine at high RPM?
The engine is not meant to run at high rpm's at a stop for a long amount of time. The motor cant circulate antifreeze and there is no air to cool the motor at a stop. Any car will do that. What a stupid answer! I didn't say I was stopped!
What is motor shaft speed?
Motor shaft speed refers to the rotational speed of the motor's output shaft in revolutions per minute (RPM). It indicates how fast the motor is rotating and is a key parameter in determining the mechanical power output of the motor. Motor shaft speed is influenced by the frequency of the electrical power supplied to the motor and the motor's design specifications.
What is the relationship between motor POLE and RPM?
Relationship between motor rpm and no of poles
How to calculate belt conveyor speed with motor RPM and ger rastioc?
we know motor rpm, gearbox ratio, gear spoket no of teeth, conveyor pully spoket no of teeth and conveyor pully O.D. Exm- we have a motor of 1500 rpm, gearbox ratio 30:1, gear spoket no of teeth 24, conveyor spoket no of teeth 48, and conveyor pully (head pully) od is 200 mm, Solu- motor speed- 1500 rpm gear output - 1500/30 = 50 rpm conveyor pully rpm - 24*50/48 = 25 rpm conveyor pully cercumfrance - 200*3.14 = 628 mm or 0.628 meter conveyor speed - 25*0.628 = 15.700 meter per menuts
What RPM can you get out of a 440 cu in motor?
I believe redline is 5,000 RPM.
What is timing setting and idle RPM for a 1985 ford 5.0 high output engine?
I believe the ignition timing for a 5.0 L high output engine in a 1985 Ford Mustang is : 10 degrees BTDC ( with a manual transmission ) and 8 degrees BTDC ( with an automatic transmission ) I don't know what the idle RPM is supposed to be , anybody else know ?
