Class A
A class C address.
A class C network supports the most networks - the first three octets or 24 bits gives the largest grouping of networks.
A class ip address offer the most number of host
Technically yes, but it's a Class D and most places only use Class A, B or C.
IP Address consists of 32 binary digits. Class A IP addresses are the ones with the 8 most significant bits of the form (0xxxxxx) -where x represents the net ID- and the rest of the IP is host ID. A class IP address usually used in cases where the number of networks is relatively low with very large number of hosts.
Class B
Network IDA network ID refers to a part of a TCP/IP address that is used to identify the subnet that a host may be on. The subnet that the computer is on is determined by the netmask and IP address of the computer. This subnet address is the same as the network ID and is the beginning part of the computers IP address.When the netmask is setup, it is a number where some of the most significant bits have a 1's value and the rest have values of 0. The most significant part of the netmask with bits set to 1's specifies the network address, and the lower part of the address will specify the host address.The part of the IP address that matches the part of the netmask where the bits are set to ones determines the network ID.
go to amw.com
Its very simple one when the host connects to the network it is DHCP dynamic host control protocol which is used to assign the IP address to the address seeking hosts in the network. it simply take any IP address from the pool of IP address and assign on to the host on lease based after using this must be sent back to the DHCP server ( your router in most cases )
The three correct options are: 3. Hierarchical Explanation: By design, layer three addressing is hierarchical, as you can group hosts in different networks. 4. Uniquely identifies each host Explanation: Each host has a unique address inside its network. 6. Contains a network portion Explanation: For example, in an IP (v4) address a portion of the most significant bits identify the network the host belongs to.1.It supports data communications between networks 2.It prevents broadcasts 3.It uniquely identifies each host
Class C
The classful network A provides 16,777,216, the most available in classful networks.Unfortunately a class A network only allows for 256 possible networks.This is of course IPv4 stuffRemember the entire IPv4 address space is 32 bits wideIn class A the network mask is 255.0.0.0 meaning that the first octet or eight spaces are reserved for networks and the remaining 24 bits are available for host.OK so the number of host are 2^24 or 16,777,216 English 16 million 777 thousand and 216 hostsAnd don't forget all networks and subnets require reserving the first and last address for the network and the broadcast address.