Chevy's rotate clockwise but to confirm, remove the distributer cap and have someone turn it over. Hope This Helps. Oilman is correct, it rotates clockwise. I have added a link to the left below that you may find useful. It contains all sorts of specifications for your rare big block 409. Hang on to this engine, as it is extremely rare if it is authentic.
Clockwise rotation. Firing order= 1 8 4 3 6 5 7 2
Looking at it from the front, clockwise.
Clockwise
I presume you are talking about how to change the direction of rotaion on an electric motor. To change the direction of a three phase motor, switch any two wires of the three phase feed, and the motor will rotate in the opposite direction.
All motors have the ability to rotate in either direction. The motor has to be connected to additional equipment to make this happen. In a three phase motor a reversing magnetic contactor is used and in single phase motor usually a drum switch is used.
motor will not rotate
If your three phase motor runs backward, you have two phases swapped. double check a, b and c phase to find which ones are misplaced.
You would reverse rotation on a 3 phase motor to get it to run backwards. Say I fill up a tank truck from a lake. I turn on my generator. I run the motor in one direction. Then I drive the tank truck and the motor to a different location. Then I turn on my generator. I attach the hose to the motor on tank truck. I throw the switch to make the motor run backwards. I aim the hose at the fire in your house. Aren't you glad that I can make my 3 phase motor run backwards?
clockwise
From the front, clockwise.
V-belt driven, clockwise.
you dont rotate it you have to pull the altnator off to change them
The same direction as the fan and the drive axle (rwd only)
Connecting Phase A, B and C to the motor leads will make a 3 phase motor run in one direction while interchanging any two will make the motor rotate in the opposite direction.
I presume you are talking about how to change the direction of rotaion on an electric motor. To change the direction of a three phase motor, switch any two wires of the three phase feed, and the motor will rotate in the opposite direction.
in any dc machine changing the polarity of the field will change its direction. here, in series motor, the field is in series with the armature, to which we feed the supply. hence, change the feeding polarity.
All motors have the ability to rotate in either direction. The motor has to be connected to additional equipment to make this happen. In a three phase motor a reversing magnetic contactor is used and in single phase motor usually a drum switch is used.
you rotate left
I use a socket with a short extension on a 1/2 drive ratchet on the harmonic balancer bolt.
Because in table fan rotor of motor moves with their blade and stator of motor fixed . But in celling fan same opposite rotor fixed then automatically have to move stator of motor . So as the reason both work as opposite direction.....