The cystalline branched polyethylene has got a complex structure than a linear polyethylene.
Usually with a 'rubberizing' additive that contains LLDPE (Linear low density polyethylene) More branches and better bonding, less amorphous. Greater tensile and impact strength than LDPE or HDPE.
Glass transition point describes the temperature when material (crystalline or semi-crystalline) loses its crystallinity but not necessary melts. For instance, polyethylene's glass transition temperature is around -140-150C, while its melting temperature is around 105-130C (light and heavy species).
When the crystalline structure has more than one structure, the material is called Polymorphic.
Polyethylene is a synthetic polymer made from hydrocarbons got fro oil. Latex is a natural coagulated tree sap made from the Rubber tree Latex is much more elastic than polyethylene and both degrade in sunlight UV
A straight chain hydrocarbon has two carbons that are bonded to only one other carbon (the terminal carbons). A branched chain hydrocarbon has more than two carbons that are bonded to only one other carbon (the terminal carbons at the ends of each branch). A cycloalkane (cyclic hydrocarbon) has no carbons that are bonded to only one carbon - the chain is hooked back to itself.
Nylon 66 is more crystalline than the polyethylene.
Some plastics are, some are not. Polymers like polyethylene and polypropylene can be partially crystalline. Typical commercial polystyrene is not crystalline, although a crystallized resin form (syndiotactic polystyrene) has been produced that resists deformation up to about 270 degrees C.
LDPE is softer, more flexible and melts at lower temperatures than HDPE. LDPE is used for things like sandwich bags. HDPE is harder, has a higher chemical resistance and can withstand higher temperatures. (120 Degrees Celsius for short periods and 110 Degrees Celsius continuously) It is used for things like Plastic bins.
The atactic polystyrene is more crystalline than the syndiotactic polystyrene.
because there is less oxygen in water meaning they have to be more efficient to get enough oxygen
Hydrocarbons are molecules comprised of only carbon and hydrogen. They can be linear like hexane They can be branched like 3-Methylpentane They can be circular like cyclohexane
Usually with a 'rubberizing' additive that contains LLDPE (Linear low density polyethylene) More branches and better bonding, less amorphous. Greater tensile and impact strength than LDPE or HDPE.
Plastic bags can be made of different polymer types such as: High-Density Polyethylene (HDPE) Medium-Density Polyethylene (MDPE) Low-Density Polyethylene (LDPE) Linear low-density polyethylene Higher density polyethylene polymers have stronger cross-links for linking large chains to another which is usually how plastic bags are able to stretch more and can hold heavier objects. Hence being stronger.
They can be made from several different things: Butene Copolymer Copolymer - HDPE (High Density Polyethylene) Ethylene Vinyl Acetate HDPE - Reclaim LLDPE (Linear Low Density Polyethylene) -Hexene Copolymer Homopolymer - HDPE Homopolymer - LDPE (Low Density Polyethylene) Homopolymer - PP (Polypropylene) PP-IM (Impact) LDPE-Reclaim LLDPE-OC (Octene Copolymer) LDPE Copolymer For more information go to http://www.townsendpolymer.com
They are similar but different. PVC is stronger & more rigid than polyethlene and is used for wastelines & polyethylene is used for water lines.
No, because crystalline has more than one element in it, basically it is a compound.
Glass transition point describes the temperature when material (crystalline or semi-crystalline) loses its crystallinity but not necessary melts. For instance, polyethylene's glass transition temperature is around -140-150C, while its melting temperature is around 105-130C (light and heavy species).