Gate
it use in adjusting amount of current passing through a circle.
An ammeter measures the amount of electrical current flowing through a conductor.
The amount of current varies between 1 mA and 3mA. The gender and age determine the minimum amount and current.
An ammeter measures the amount of current flowing through an electrical circuit. It measures amperage.
Two resistors wired in series (no mater if they have the same resistor value or not) will always have the same amount of current flowing through them. Therefore, the current flowing through the second resistor will be equal to the current flowing through the first one. The current through every component in a series circuit is the same. The voltage across every component in a parallel circuit is the same.
The stronger the magnetic field on your inductor the greater amount of current you will have flowing through your series circuit.
There are two primary types of transistors classified on the basis of power: bipolar junction transistors (BJT) and field effect transistors (FET). Bipolar junction transistors are current-controlled devices, meaning that the amount of current flowing through the device is controlled by the voltage applied to the base electrode. The base-emitter voltage (VBE) and base-collector voltage (VBC) determine the amount of current flowing through the device. The current flowing through the device is given by the following equation: I = β * (VBE - VBC) Where β is the current gain of the transistor. Field effect transistors are voltage-controlled devices, meaning that the voltage applied to the gate electrode controls the amount of current flowing through the device. The voltage applied to the gate electrode determines the width of the conducting channel between the source and drain electrodes. The current flowing through the device is given by the following equation: I = μ * W * (VGS - VDS) Where μ is the mobility of the carriers in the channel, W is the width of the conducting channel, VGS is the voltage applied to the gate electrode, and VDS is the voltage applied to the drain electrode.
Current intensity refers to the amount of electric current flowing through a conductor in a given time, measured in amperes (A). It is a measure of the rate at which electric charge flows in a circuit.
An ammeter measures the amount of current flowing in a circuit
What is the amount of current flowing through the resistor? Voltage drop is dependent on the current. Ohm x Amps = Voltage drop
currents can be thought of simply by flowing through a wire, though not always the case. It is convenient to think of current density which is the amount of current flowing through a cross sectional area, like water through the opening of a pipe, since electric current flows through many 3-dimensional objects.
This is dependent on: 1. The construction of the Magnet...materials, size, design. 2. The amount of CURRENT flowing through it.