Want this question answered?
Yes. To make something move, you have to add energy. An electric motor won't turn by itself.
of course you can.but the purpose of electricity is lost here.generators run by petrol or diesel engines are used because you dont have a electric supply or there is a power outage.if there is no power how can you run the electric motor which runs the generator.hence the generator is always coupled with and diesel IC engine.
A DC power supply supplies directional current in an electric motor. This is significant because many motors run on directional current, or DC power; it's easier to convert to kinetic energy than alternating current (AC), which is generally used to transmit power over long distances.
A direct on line starter, often abbreviated DOL starter, is a widely-used starting method of electric motors. The term is used in electrical engineering and associated with electric motors. There are many types of motor starters, the simplest of which is the DOL starter. A motor starter is an electrical/electronic circuit composed of electro-mechanical and electronic devices which are employed to start and stop an electric motor. Regardless of the motor type (AC or DC), the types of starters differ depending on the method of starting the motor. A DOL starter connects the motor terminals directly to the power supply. Hence, the motor is subjected to the full voltage of the power supply. Consequently, high starting current flows through the motor. This type of starting is suitable for small motors below 5 hp (3.75 kW). Reduced-voltage starters are employed with motors above 5 hp. Although DOL motor starters are available for motors less than 150 kW on 400 V and for motors less than 1 MW on 6.6 kV. Supply reliability and reserve power generation dictates the use of reduced voltage or not. A very well-known motor starter is the DOL Starter of a 3-Phase Squirrel-Cage Motor. This starter is sometimes used to start water pumps, compressors, fans and conveyor belts. With a 400V, 50 Hz, 3-phase supply, the power circuit connects the motor to 400V. Consequently, the starting current may reach 3-8 times the normal current. The control circuit is typically run at 24V with the aid of a 400V/24V transformer
Electric motor.
A motor
an electric motor can be build with over 2000 rpm,by increasing the supply frequency.
Yes. To make something move, you have to add energy. An electric motor won't turn by itself.
suitable winding and correct power supply
If you lose power the electric motor may supply power.
Armature Commutator Brushes Axle Field Magnet DC power supply
Possible Faulty wire or even a starter or alternator failure.
Have the Arduino control a relay that connects an external power source to the motor.
It connects to the back of the alternator towards the top.
The electric motor changes electric energy into mechanical energy.
An electric motor
of course you can.but the purpose of electricity is lost here.generators run by petrol or diesel engines are used because you dont have a electric supply or there is a power outage.if there is no power how can you run the electric motor which runs the generator.hence the generator is always coupled with and diesel IC engine.