answersLogoWhite

0

What else can I help you with?

Related Questions

What is the power of a power supply?

power supply is a device that supplies electric power to electrical load


What is the use of a power supply?

power supply is a device that supplies electric power to electrical load


Can you use a 12vac 1amp power supply on a device that requires 15vac 130mA?

No, you cannot.


Can you use a dc 5v 2a for a device 4.5v 1.5a?

Yes, you can use a 5V 2A power supply for a device that requires 4.5V and 1.5A, but you need to be cautious. The voltage is higher than what the device requires, which could potentially damage it. It's best to use a power supply that matches the voltage specifications of the device, or to use a voltage regulator to step down the voltage to 4.5V. The 2A rating indicates that the power supply can provide more current than needed, which is fine as the device will only draw the current it requires.


A device that creates a potential difference in an electric circuit is?

It is called power supply or battery.


Can you use a 12v dc 1a power supply on device that requires 12v dc 3200ma?

No, the 1A power supply does not provide enough current (3200mA required) for the device to operate properly. You need a power supply that can deliver at least 3200mA to meet the device's power requirements. Using an underpowered supply may result in the device not functioning correctly or potential damage.


Can you use a 300ma power supply in place of a 400ma supply?

Yes, you can use a 300mA power supply in place of a 400mA supply, but it may not provide enough current for the device to operate properly. If the device requires 400mA and only receives 300mA, it may underperform, malfunction, or even be damaged due to insufficient power. It's important to ensure that the power supply meets or exceeds the current requirements of the device for safe and effective operation.


Will a device that requires a 1.3A power supply work with a 500mA supply?

No, a 500 mA supply can only produce a half amp maximum without going into an overload condition.


What is an internal power supply?

An internal power supply is usually a battery. An external power supply means the electric current that you get by plugging your device into a wall outlet. If you do not have to plug it in, then it has its own power supply inside the actual device, in other words, it is internal. Aside from a battery, it could have photovoltaic cells to generate power, or other internal sources of power, anything other than an external source.


Can you use a 12 volts 3 amp power supply on a 12 volt 500 milliamp device?

Your power supply can supply 1 A, but your device requires 2 A. So the power supply will be overloaded. So the simple answer is no.


Can you run a device that requires 700mA with a power supply that generates 1.8A?

A power supply that produces 1.8 amps is the same as saying 1800 mA. What has to be taken into account here is if the voltages are the same. If the device that uses 700 mA has a specific voltage to operate on can the power supply provide the same voltage. Another factor to look at is , both the device and the power supply have to match their AC or DC requirements. One can not be AC and the other DC or vice versa.


Can use 1A power pack for 500mA device?

Yes, you can use a 1A power pack for a 500mA device. The power pack will supply the necessary 500mA the device requires, with some extra capacity. Ensure that the voltage output matches the device's requirement to avoid any potential damage.