neither, you need a rollover cable
what is different between cross cabling and straight cabling ANSWER: a crossover cable is used to connect like devices, like a router to a router, but a straight through cable is used to connect dissimilar devices, like a router to a computer.
when you are connecting same devices like computer to computer or switch to switch or router to router to use cross over cable. when you are connecting different devices like computer to switch or computer to router to use straight cable.
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
straight cable is needed when connecting two computer periperhals. A cross over is used when connecting a computer to a network hardware (router, swirch, etc..)
Because they are considered to be "Like" devices
In ethernet terms, a straight-through cable connects a client device to a hub, switch or router (straight-through meaning the connection is pin-to-pin, the opposite of a cross-over cable, which connects RX-TX and vice-versa).
crossover cables must be used between 2 devices from the same level like (pc & pc - Pc & router - router & router) but strait through cable used between 2 different levels like (pc & switch - router & switch )
EIA 568A/B standards apply.
When connecting two computers, use cross-over. Cross-over is required to connect the transmit and receive terminals of the two endpoints. When connecting through a router, switch or hub, use straight-through. The router, switch or hub provides the crossover.
1. straigth cable are more effective than the crossover cable....
"RJ-45 Cross cable" is required for a direct ethernet connetion between two pcsbetween the same type of network devices (PC-to-PC, switch-to-switch, router-to-PC (Note: router and PC are LIKE devices, because both are DTE)) you use Crossover cable.to connect different type of devices (PC-to-switch, PC-to-router ..) you use Straight Through cable.
You need to use a straight type of connection. 568A or 568B depending which type your network is using.