you pull UP on the handle to latch the door, may have to pull hard. Slamming may latch also but is not the correct way.
Replace the door latch.
If the door latch on a 1999 Chevrolet Blazer is broken on the car frame, a new latch might have to be welded in. The old door latch will have to be cut out with a torch. If the latch is broken on the door, a new door might be cheaper than welding in a new latch.
Adjust the stricker whichever way it need to go.
You have to take the inside door trim out of the door, then there will be some bolts on the inside of the door remove the nuts and your door latch will come out.
what is wrong with the door latch? will it not open/latch? what year is the vehicle? all of these are needed to answer your question.
The Pontiac Grand Prix door latch has adjustments to move the latch up and down and in and out. Loosen the adjustment screws. Keep moving the latch in one direction or the other, until the door catches the latch.
It is part of the latch, inside the door.It is part of the latch, inside the door.
Defective door latch or Nader Pin needs adjustment
door latch diagram for 2000 Chevrolet silverado
left door latch is broke
I have dealt with this problem before at our bodyshop. Basically, a spring inside the latch has broke, and now there is no way to release the latch, even by manually pulling on the release lever at the latch. Prepare to replace the latch, as it is not repairable. Be prepared to be working inside the car. To make it easier to work, unbolt the seat, and remove from the car. Remove the door panel, and also the door handle. You will have to chisel at the plastic part of the latch, and break it off bit by bit. Eventually you will be able to release the latch. good luck