0
Red
Wiki User
∙ 11y ago
Add your answer:
Earn +20 pts
How do you connect a universal car fan?
body of fan to ground and the wire to positive
How does a hot wire relay work?
35 ampRefrigeratorRun a hot wire to the positive wire on the radiator fan
Radiator fan does not work?
Run a hot wire to the positive wire on the radiator fan. If it works, then you have a fuse or a relay (or even a short in the wire). If it doesn't work at all, then the fan motor is bad.
Why doesn't my 300d Mercedes fan work?
Disconnect the plug to your fan. Hook a jumper wire to ground the negative wire and a hot wire to the positive wire. If the fan doesn't work, then you can buy one on Ebay or other sources.
If a hot wire to the battery from the fan is ran.How do the other wires go when using a toggle switch for it?
I assume you are wanting to manually control the fan. Just run a positive wire from the battery to the toggle switch line side. Then run another wire from the toggle switch load side to the fan. Ground the fan at the fan location. Be sure and use a large enough gage wire to handle the current and an in line fuse to protect the circuit.
How do you hook up your cooling fan to your battery?
A person can hook up a cooling fan to a battery by connecting the hot or positive lead to the positive side of the battery. The negative lead wire is then connected to the negative side of the battery.
How do you wire a rocker switch to radiator fan on a Grand Am?
to shut the fans on and off by yourself. remove the connector for the wires at the fan. hook a wire from the positive on fan motor to the inside toggle switch, do not hook to switch yet. run a wire from the positive on battery, hook to battery after hooking up switch. hook up the wires to the switch. then the battery. its up to you if you want to install a 15 amp fuse in line from battery to toggle switch.. you can also get the power from the fuse box instead of the battery. this should work for you. if not you may need to ground the other fan wire.
How do you tell if fan motor is bad on a 1995 Saturn SL1?
Quite simple. First does the fan engage when the car is hot? Second take a voltage meter and put it on volts. Now ground the black wire from the fan to the black multi meter lead and and the red meter lead touch the positive wire. If the fan engages the motor is not bad. Then the temp sensor would be bad. An easier way to check is to simply buy (if you dont have one) a power probe that connects to the battery and then touch the positive wire of the fan motor and see what happens
97 Mercury mountaineer-you want to add air hornWhat wire do you hook the positive air horn wire to?
positive wire to another positive wire
How do you test fans on a 2000 Malibu?
on cooling fans disconnect wire at fans,runwire from fan side to positive on battery!!run another wire to ground. if they are ok they will run!!if not it can be bad fans or a bad fan sensor!!check for bad fuse!!first
What is positive wire?
Positive wire is red, at least on automobile batteries.
How do you wire a 6 volt positive ground system?
Positive Cable from Battery to ground location on frame Negative to Starter Use #2 guage cable for best results Answer No. 2 You don't wire positive ground. Wire negative ground and you will forever be thankful. With a positive ground car everything, like a radio, elect fuel pump, elect fan or anything you add will have to be isolated because everything is made negative ground. You can't wire stuff made negative ground to a positive ground you get the shorts.
