take it to a pro wiring is very tricky if you do not know what your doing
Bad bulb? Bad socket? Bad wiring to socket?
32 mm socket!
Any type of socket can be used to remove a 91' Cavalier wheel cylinder bolt that looks like a reversed torx. However, make sure the socket is a bolt head socket.
My 1997 Chevy Cavalier with 2.2L motor used a 15mm socket.
It is at the rear of the headlamp assembly where the wires are.
how to repair cracks on yukon dash
Stick you tongue to it!
checked fuses, or checked for voltage to interior light socket?
To release the 1990 Cavalier serpentine tension, use a socket and a ratchet. Put the socket on the bolt heat in the middle of the pulley wheel, and pull to one side, and the belt will be loosened to be able to be removed.
You turn it counter clockwise with a 1 1/4 six sided socket.
Spindle nuts very from 30mm to 34mm
I recently did some password changes to my email account and started getting error 10060 while trying to send email immediately after (incoming SSL messages were fine). I use SSL to send my email and the default port number should be 465. If yours is set to port 25 when using SSL it will not work. I still encountered problems sending even though I re-checked my send mail settings a million times. Finally I unplugged my modem and router for a couple of minutes, rebooted the computer, and all my send mail settings worked, even though they were CORRECT to begin with. There are 3 step to repair socket 10060 0x800ccc0e error If you got socket 10060 0x800ccc0e error then there is a 94% chance that your computer has registry problems. To repair socket 10060 0x800ccc0e error you need to follow the steps below: * Step 1 - Download a socket 10060 0x800ccc0e error repair tool,install this error repair tool. * Step 2 - Click the Repair All Button.It will scan you PC for Free. * Step 3 - Then click the Repair All Button again and your done! It is very easy to repair socket 10060 0x800ccc0e error. Here are the URL of socket 10060 0x800ccc0e error repair tool:http://www.fixerrorquick.com/ttfix-socket_10060_0x800ccc0e_error-zz0005
The fuse is ok but the lighter won't work.
Yes. It's disguised as a standard 12V cigarette lighter.
Smoking after tooth extraction can cause this. Get it checked by a dentist.
reach up under the dash and each bulb is in a twist in socket, twist the socket and pull out each one individually and replace bulb in socket and reinstall.
You use a 1 1/4"socket (preferably six-sided).
You need a 3/8 Allen key to release the caliper.
No, the plug and socket are incompatible, and even if you changed the plug, the unit would not operate on such alow voltage.
change the socket the bulb fits in.. can be purchased at pepboys autozone etc
i think we may need more info here what do you mean by the socket ? are you just saying the light to the plate is not working ?
Replace: Fuse Socket Element