you have water in the oil. either a blown head gasket or a cracked cylender head.
It is sort of a paste but you can also sustitute it for white vegtable oil
Wipe the oil pan clean. Place a white cloth or white paper under the oil pan and start the engine. Let it run for a few minutes and shut down. Look for oil spots on the white surface. This will tell you the general location of the leak.
To effectively clean burnt oil from a pan, you can try soaking the pan in hot, soapy water for a few hours, then scrubbing it with a mixture of baking soda and water. You can also use a paste of vinegar and baking soda to help remove the burnt oil. Remember to use a non-abrasive scrubber to avoid damaging the pan's surface.
To clean a copper pan effectively, mix equal parts of salt and white vinegar to create a paste. Apply the paste to the pan and scrub gently with a soft cloth or sponge. Rinse with warm water and dry thoroughly. Alternatively, you can use a commercial copper cleaner following the manufacturer's instructions.
Drain the oil from your oil pan. Remove the oil pan bolts. There are 24 oil pan bolts. The oil pan will come off.
it means you are about to put a rod into your oil pan.
To effectively remove burnt oil from a pan, you can try soaking the pan in hot, soapy water and then scrubbing it with a non-abrasive sponge or brush. You can also use a mixture of baking soda and water to create a paste and scrub the burnt oil off. Additionally, you can try using a commercial degreaser or vinegar to help break down the burnt oil.
You will need to drop the oil pan to change the oil pan on a Hummer 2. The oil pan is located in inside the oil pan. You also need to first drain the oil pan of the old oil before you drop the pan.
I believe they are moisture spots from hot things such as coffee or a hot pan off the stove. It comes right off with tooth paste tough!! regular tooth paste not the gel kind! put regular tooth paste into it rub it in and then wipe it off with a room temperature water on a wash cloth and it comes right off its an amazing miracle!!
You will need a new oil pan gasket when the oil pan gasket leaks. It is recommended that you use a new oil pan gasket every time you remove the oil pan.
Drain the oil from your 1996 Chevy Lumina oil pan. Remove the oil pan retaining bolts. The oil pan will come off.
Drain the oil from your 1995 Chevrolet oil pan. Remove the oil pan retaining bolts. The oil pan will come off.