Were the rings replaced at the time the head gasket was replaced? Common problem when replacing the head gasket is not fixing other engine problems which usually go hand in hand with head gasket problems.
Purchase a Chilton Auto Repair Manual, and follow the instructions. Remember to take your time and get all of the gaskets you will need to do the work. Head, Valve, Pleneum, and possibly the Exuast Maniflod Gaskets.
on a hoist
on a 97 you should have four sensors and they are located on the exuast one on each down pipe one right before your exuast comes together and one right after it comes together
No just dont put water in the exuast pipe
yes they are all the same
They go into the atmosphere and (probably) help cause global warming.
yeah its safe
well there should be an arow on the top of the piston which points to the exuast
hi it is behind the front exuast pipe u have to use a morror u can call me on 0415155475
on mine it was under the exuast pipe and i little to the the right... i was amazed that's a really hot place
either 170hp or 200-230hp depending on transmission and exuast choices.
You can but there are issues with doing that. It will damage the SCR system. It will cause the SCR light to come on. IT will freeze hard in the winter.