LED means Light Emitting Diode A diode only lets current through in one direction - that's what they do.
AC means Alternating Current - the current goes from plus to minus and back again 50 or 60 times a second (depending on the standard)
DC Motor works on DC source and AC motor works on AC source
LCDs are driven with AC, to prevent electrolytic damage to the thin transparent electrodes. LEDs are driven with DC.
Ti controls the capacity of power our machines use
It depends on the motor. The fan is driven by an electric motor, and it can use a dc motor (as in a car) or an ac motor (as in a house). They are not interchangeable.
A transformer is a device to convert high voltage AC to low voltage AC & vice-versa. It works on the principle of induction. Since induction occurs only in an AC supply, a transformer cannot work on DC.. So, it is not possible to convert DC supply to AC using transformer. You would need an inverter to convert DC to AC.
No. An LED (light emitting diode) allows current to flow in one direction, thus it cannot alternate as is implied by "an AC source". ANSWER: YES they can. Any diode can work with AC They can work from AC line directly. My overhead light in my kitchen are across 120 AC now for 8 years. But then again I know what I am doing
With the proper AC to DC adapter, you can power the LED.
DC Motor works on DC source and AC motor works on AC source
Indoor and outdoor
Ac/ dc
The bulb works under AC
no
LED's (Light Emitting Diodes) work on DC current, not AC, so the AC needs to be stepped down to an appropriate voltage via a transformer (probably only a few volts), converted to DC via a rectifier and filter (to smooth out the ripple current). there are a constant driver in side the 120V AC led light bulb , this driver transfer the AC to DC, so the led could work with DC.
LED's (Light Emitting Diodes) work on DC current, not AC, so the AC needs to be stepped down to an appropriate voltage via a transformer (probably only a few volts), converted to DC via a rectifier and filter (to smooth out the ripple current). there are a constant driver in side the 120V AC led light bulb , this driver transfer the AC to DC, so the led could work with DC.
this works with both.
This AC/Heater unit works best for a room size of 10 x 15.
An AC Drive used for a speed control of a motor by using vary frequency.