No. An LED (light emitting diode) allows current to flow in one direction, thus it cannot alternate as is implied by "an AC source".
ANSWER: YES they can. Any diode can work with AC They can work from AC line directly. My overhead light in my kitchen are across 120 AC now for 8 years. But then again I know what I am doing
this works with both.
A halogen bulb works equally well with AC or DC.
Metallica, AC/DC, Led Zeppelin, Motorhead, Black Sabbath
DC, in DC motor, is an acronym for Direct Current, which means that it works on direct electrical supply by a battery. In an AC motor, the motor runs on Alternating Current Supply from other sources other than batteries, such as electricity from your house.No, d.c. is not an acronym. It is simply an abbreviation."a word formed from the initial letters or syllables taken from a group of words"http://www.thefreedictionary.com/acronymYes, a word. "dc" is not a word.
Code 51 also refers to the throttle position sensor. You need to test the sensor - a factory repair manual will give the procedure and specs for testing.
With the proper AC to DC adapter, you can power the LED.
DC Motor works on DC source and AC motor works on AC source
AC power sources are the adapter power sources. DC power sources are the direct power sources. DC stands for direct current, meaning it is a direct source of energy., and AC stands for alternating current, which means it is a secondary source of power.
Indoor and outdoor
LED's (Light Emitting Diodes) work on DC current, not AC, so the AC needs to be stepped down to an appropriate voltage via a transformer (probably only a few volts), converted to DC via a rectifier and filter (to smooth out the ripple current). there are a constant driver in side the 120V AC led light bulb , this driver transfer the AC to DC, so the led could work with DC.
The bulb works under AC
no
Ac/ dc
this works with both.
SCR's are mainly used in AC circuits. They could be used in DC circuits but they then would not be able to turn off. They require the zero crossing of the AC circuit to turn off. Then when positively biased they can be turned back on.
This AC/Heater unit works best for a room size of 10 x 15.
An AC Drive used for a speed control of a motor by using vary frequency.