>Very simply, you modulate a signal to carry a message.
While a message can be carried over the airwaves without modulation, a modulated signal requires less power to transmit and a smaller antenna due to the higher frequency of the carrier wave. Modulation also lets many different radio, TV, cell phone, etc. users send messages over the airwaves without interfering with each other.
Answer - a bit moreIt is said that a carrier alone conveys no information (think about it).However, that's not entirely true.
An unmodulated carrier tells me that at least a transmitter is active/working. Other things may be inferred from that.
"Base band", meaning that no modulation is used."Base band", meaning that no modulation is used."Base band", meaning that no modulation is used."Base band", meaning that no modulation is used.
Adaptive delta modulation is used in audio communication systems to avoid the two drawback of delta modulation.
pulse code modulation method used a telephony.
Adaptive delta modulation is used in audio communication systems to avoid the two drawback of delta modulation.
It is used to delay the modulation
If you speak loudly then softly you have used modulation of your voice
Amplitude Modulation (AM) is used for the picture portion of a television transmission while Frequency Modulation (FM) is used for the audio portion.
Actually phase modulation was used for the color signal in all analog TV systems.Phase modulation, with some signal preprocessing, was used to indirectly get frequency modulation in many FM transmitters.Certain modems use phase amplitude modulation.etc.
Actually phase modulation was used for the color signal in all analog TV systems.Phase modulation, with some signal preprocessing, was used to indirectly get frequency modulation in many FM transmitters.Certain modems use phase amplitude modulation.etc.
pulse position modulation, used in many RC model aircraft controls.
amplitude modulation is used
Modulation Index is the ratio of the maximum deviation frequency to the frequency of modulation. In other words it is the ratio of the spread in frequency spectrum to the frequency that was used to modulate the carrier. For FM, modulation index is given by the formula mf= df/f where, mf=modulation index for FM df=difference in carrier frequency f=frequency of the signal